![]() ![]() This light applies only to electric vehicles (EV) and indicates the vehicle is in power-saving mode. It’s not recommended to drive the vehicle with this light on. The steering wheel may be tough to turn, but it will still work. This light means that there is a problem with the electronic power steering assist. This light means there is a problem with the electronic power control module. The park brakes motor may fail, which means the parking brakes may not be able to engage at all. They may get stuck engaged and therefore prevent you from driving. This light means that there is a problem with the electric parking brakes. This light means that one of the doors is open or not fully closed. ![]() This light means that cruise control has been turned on. If the collision alert light stays on all the time, it means that the system has been disabled due to a problem. If the collision alert flashes or turns on briefly, it means that the vehicle has intervened and avoided a collision. If needed, call an auto mechanic and ask for advice. It could also indicate a problem with the brake system.ĭo not drive if the brake light stays on. If the brake light stays on, it could be due to the low brake fluid level in the brake reservoir. First, make sure that the parking brake is released. This light means that the lights will switch between high and low beams automatically. This light means that adaptive cruise control has been turned on. This light means that vehicle is set to switch between 2WD and 4WD as needed. If the light stays on, you may have a bad battery or alternator or a broken serpentine belt. The battery light should not stay on when you are driving. This light means that there is a problem with the charging system. Open the driver’s door, and you will see the tire pressure label. Inflate the tires to about 35-40 PSI.Ī sticker on the door frame shows you exactly how much air your Chevy needs. This light means that the air pressure in one of the tires is below 30 PSI. Once the engine has completely cooled down, you should check the engine coolant level.ĭo not drive or keep the engine running if the engine overheating light stays on or is flashing. Allow the engine to cool down for at least 30 min. Pull over as soon as it is safe to do so and shut off the engine. This light means the engine is overheating. Note that most generic OBD-II scanners can not read Airbag Codes. You need to read the Airbag / SRS module’s fault codes with a Chevrolet Airbag Scanner to find out why your Chevrolet airbag light is on. Other possible problems include low battery voltage or faulty clock spring. A common problem that triggers the airbag light is a faulty passenger weight seat sensor mounted on the front passenger seat. Airbags have been disabled and most likely won’t deploy if you get involved in an accident. This light means that there is a problem with the airbag system. To find out why your Chevrolet check engine light is on, you will need to use an OBD-II scanner to read the ECM module’s codes. One or more fault codes will be stored in the Engine Control Module (ECM). This light means that the onboard diagnostic system has detected a problem. To troubleshoot the ABS light on a Chevrolet vehicle, you need an ABS OBD-II Scanner. Use the scanner to read the codes from the ABS module to find out which sensor is bad. In most cases, this problem is caused due to a faulty ABS wheel speed sensor. The vehicle may take longer to bring to a stop or may skid during hard braking. This light means that the anti-lock brake system is disabled. Is there a warning light appearing on your Chevrolet dashboard? Learn the warning light’s meaning and possible solutions to fix the problem.īelow are all Chevrolet dashboard warning lights, symbols, and what each light means. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |